To alter which phones ring when calls come in please follow the steps below:

1. Find your VoIP IP address from the Settings menu on your handset by selecting the central button on your handset as shown below and selecting the Settings icon which is shown as a Spanner.

 



2. Scroll down to select the System menu option

 

3. Scroll down to select Local Network and you will see your IP Address displayed.


4. Enter this VoIP IP Address into a web browser to take you to your Gigaset N300 IP Base Unit settings.

 

5. Alternatively you can do the following to find your IP Address:

 

Press the ‘blue’ button on your N300IP box – this should ‘page’ your phone – but will also display the IP address of the N300IP box … take

a note of the IP address and enter into the address bar on a web browser.




 

6. Enter the System PIN by entering 0000 (four zeros) press OK


7. Go to the Settings / Telephony / Number Assignment screen as shown below: 




8. On this screen you will be presented with a screen listing your handsets - for each handset just un-click the check box under incoming calls that you do not want the phone to ring for as shown above. 


9. When you are done - just go to the bottom of the screen and press Set


10. Please click log off to exit.